|Payment & Shipping Terms||Supply Capacity|
|Unit Price:||10000.0 USD||Production Capacity:||100|
|Min. Order:||1 Set/Sets||Packing:||wooden box|
HAO-4 special up-lift high temperature precision hot air equipment
Internal dimensions 100(W) x 80(D) x50(H) cm
Outer dimension 160(W) x160(D) x220(H) cm approx
Temperature range room temperature plus 10℃ to MAX500℃ commonly used 450℃ control accuracy ±0.5℃
AC380V 3 kilohertz 20KVA
Material inside, in all adopt SUS430# stainless steel plate manufacturing.Externally, SS41 # steel plate is sprayed with baking resistant paint.
High density high temperature rock wool insulation insulation
The control system adopts the daily ys-900 programmable automatic temperature controller (8-segment rising and cooling), digital setting and digital display, PID automatic calculation, and SCR action.
Special elliptic electric heating tile of the electric heating system, combined with the Swedish KANTHAL a-1 resistance to ultra-high temperature nickel-chromium alloy electric heater, is evenly heated, has A long life and is not prone to failure
The high temperature oven of the air supply system is indirectly driven by a heat-resistant motor, with SUS304# stainless steel multi-wing wind wheel for high temperature, the air supply returns to the ring horizontally, so that the temperature distribution in the box is even.
The ventilator can be connected with the exhaust pipe directly.
The door is single-door type, with the upper lift door (90° open lift) and American fully open rear knob. The door is surrounded by high-temperature asbestos forced heat insulation.
Standard accessories 1. Signal lamp -- 1 2. Electric SW -- 3 3. No fuse switch -- 1
5. Ammeter -- 1 only 6. Power cord 3M long -- 1
Note 1. 4" exhaust pipe (about 1m long) and exhaust fan are attached
2. Motor belt automatically lifts the door with chain
3. There is a small door on the side of the bottom (drawer type, pull out with the side door switch), the waste material is left in the small plate, and then cleaned by the small plate
Hot air circulation oven is our Original product, with carefully designed and continuously update,it have reach the international advanced level.
The device is a kind of Oven, and can be installed, divided into CT type (centrifugal fan)
CT-C (axial fans) series products, it is the use of steam, electricity and gas as heat source,
through the heater heating,a large number of hot air will circulate in the Oven, and then continue to dehumidify from the outlet,increase the heat transfer effect, and keep reducing the moisture.
The oven equipped with low noise and high temperature proof axial flow fan and automatic temperaturecontrol system, the circulatory system fully closed, the thermal efficiency of the oven is from the traditional drying room 3 - 7% increase to the current 35 - 40%, the highest thermal efficiency up to 70%.
The device named SAO series is according to the National Pharmaceutical Administration released the industry standard.
1.Strong durability: As the haater is sealed in the housing,the contact area with air is small,it is difficult be oxidized.
2.Heated air circulation: Baked good is heated uniformly
Accurate and reliable electrical control:reasonable structure,effective working area,full-function,simple operation,easy to maintenance and adjustment,low noise,high reliability,low cost,low energy consumption and high production efficiency.
Apply for baking of food and goods with chemical gas ,removal of the substrate,curing of the lnk and drying of film and so on. Widely used in the precision baking,drying,tempering,preheating,stereotypes and processing of electronics,electrical,communications,plating,plactics,metal,chemicals,food,printing,pharmaceutical,PC board,power,dipping,spraying,glass,ceramic and building materials and so on.
With the help of our experienced professionals, we offer a comprehensive range of Hot Air Oven that gives accurate control over
temperature setting. These are provided with double walled insulation, which keeps the heat in and conserves energy. To assure
optimum performance and durability, we manufacture these ovens using superior quality raw material such as sheets and structural
steel, blowers and motors, burners, insulation , heat exchanger and Control systems.
VITECH manufactures the following type of ovens
Dry Off Ovens for moisture removal after Pretreatment or any wet process
Industrial Drying Oven for any drying application
Batch / Conveyorised Ovens for paint or powder curing
Hot Air Generators - Electrical / Oil /Gas
Dongguan City Jinyao Exactitude Equipment co., LTD are able offer a complete range of Laboratory ovens, Drying Ovens and Curing ovens including Temperature Chambers that offer a good range of solutions for the testing, storage and drying or curing materials and components, electronic components and assemblies, the storage of laboratory test samples and the testing of material samples.
Our laboratory, drying, curing ovens and Temperature chambers are supplied with a microprocessor controlled PID control system, with several levels of programmable functions dependent upon model chosen which can be used either as single set point controller for long term stability tests or as Fully programmable controller for cyclic type testing.
(1) By sea (2) By air (3) By expressage.(DHL,FEDEX,UPS,TNT etc.)
We also packing acording to customers' requirement.We can make the prouducts according to your requirement , no matter what country are you from.
1. Can you customize the product?
Yes, we can customize any products according to customer's requirements
2. Which payment terms are you doing?
PayPal, West Union, T/T, (100% payment in advance.)
3. Which shipment is available?
By sea, by air ,by express or as your requirement.
4. Which country you have been exported?
We have been exported to many countries, all most all around the world, like Malaysia, Vietnam,
Thailand, United States, France, Spain, Mexico, Dubai, Japan, Korea, Germany, Porland Etc.
5. How long is the delivery time?
It's about 15-30 days.
Category: The high quality component that we used.